-40%
Zeitrelais 12V DC 10A LED Anzeigen Timing Timer Delay Relay Modul Zeit Relais

Zeitrelais 12V DC 10A LED Anzeigen Timing Timer Delay Relay Modul Zeit Relais

€ 6.33

Availability: 1000 in stock
  • Rücknahme akzeptiert: Verbraucher haben das Recht, den Artikel unter den angegebenen Bedingungen zurückzugeben.
  • Marke: Markenlos
  • Herstellernummer: nicht zutreffend
  • Condition: Neu
  • Nach Erhalt des Artikels sollte Ihr Käufer innerhalb der folgenden Frist den Kauf widerrufen oder den Rückgabeprozess einleiten: 60 Tage
  • Rücksendekosten trägt: Käufer trägt die unmittelbaren Kosten der Rücksendung der Waren

    Description

    kontakt
    newsletter
    andere artikel
    Bewertungen
    Digital Display Time Relay
    Timming range: 0-999s, 0-999m, 0-999h
    Supply voltage: 12V DC
    Product weight: 26g
    Instaled size: 69 x 36 x 24mm (L x W x H)
    Power dissipation: <0.6W
    Maximum power: 2000W
    Maximum current: 10A
    Dual LED display, so you can set two group timing time T1 and T2. It will very convenient to customers.
    Three timing time for your choice: 0-999s, 0-999min and 0-999h. You could set the timing mode as your requirement.
    Six operating modes for your choice.
    Product Instructions
    Please pay attention for your first use. You need wait 6s after your setting data, the module will save the date you have set after 6s.
    Short press button SET: If you start the time setting mode, Nixie tube will blink. You could adjust the time T1 and T2 by button + and button -. Please wait 5s after your setting date, the module will save the date you have set after 5s
    Long press button SET: if you start the parameter setting mode. There are two group parameter for your choice : P0 and P1. You could switch P0 or P1 by short press SET. Under the parameter P0 and P1, you could set the timing mode by the button + and button -
    P0--0: Timing time mode: 0---999s
    P0--1: Timing time mode: 0---999min
    P0--2: Timing time mode: 0---999h
    P1--0: The relay will connect after you delay the T1 time.
    P1--1: The relay will disconnect after you delay the T1 time.
    P1--2: The relay will connect after you delay the T1 time first, Then the relay will disconnect after you delay the T2 time, it finish.
    P1--3: The relay will disconnect after you delay the T1 time first, Then the relay will connect after you delay the T2 time, it finish.
    P1--4: The relay will connect after you delay the T1 time first, Then the relay will disconnect after you delay the T2 time, it is cyclic.
    P1--5: The relay will disconnect after you delay the T1 time first, Then the relay will connect after you delay the T2 time, it cyclic.
    Example: A customer needs 10 seconds to start up and 20 seconds off. Setup is as follows:
    T1 set time 10, T2 set time 20
    P0 -- 0 (T1 time range is seconds)
    P1--5 (timer work mode)
    Aplication
    It can be widely used in many regular occasions.
    It can be widely used in industrial control.