Sonoff WiFi Wireless Smart witch Home Relais Board Delay Modul APP Smart HomeNEW

Description

Store Categories
Store Categories
eBay Motor
Fashion
Books, Movies & Music
Electronics
Collectibles & Art
Home & Garden
Sporting Goods
Toys & Hobbies
Business & Industrial
Health & Beauty
Other
Product View
Detailed Description
Netzwerk Relay WIFI Module
Description
With ESP8266 Wifi module,4-layers board design.
Input overvoltage protection, input with TVS, when voltage exceeds 33V,
automatic protection will operate.
Input overcurrent protection.
220V 10A relay, one normally open, one normally closed.
One way optocoupler isolation input, TVS input protection.
High-current terminals.
One output status indicator, one input status indicator.
More safe with relays PCB pin anti-climb design.
Access control server via TCP CLIENT mode
Via HTTP protocol control
Specifications:
Input voltage :DC 7-30V
Board dimension:65mm × 40mm × 20mm
DC 12V WiFi Relay Module
Product Introduction:
1.Size:5.2*2.8*2cm
2.Operating Voltage:DC 12V
3.Operating Current:250mA
4.Quiescent Current:90mA
5.Output Port:NO NC,mechanical switch output port
6.Port Withstand Voltage:AC 0-250V/7A;DC 0-30V/7A
7.Control Way:wifi network control,support 2G/3G/4G cellphone network
8.Operating Mode:inching
Package includede:
1*DC 12V Wifi Relais Modul Wireless Relay Switch Module Jog Mode Low Power
ESP8266 12V WIFI Relay
1.
Description:
The 12V ESP8266 two way WIFI relay module is based on ESP-01 as the WIFI module, with 8 bit MCU chip, and realizes the wireless control of the relay in the local area network by mobile APP through a simple configuration process.
2. Function and features:
1>. On-board high performance microprocessor STM8S103 and ESP-01 WIFI module
2>. The module has 2 modes of work
Mode 1: the mobile phone is applied directly on the WIFI module
Mode 2: the mobile phone and the WIFI module are applied to the router at the same time.
Additional function: it can also be used as a USB relay when the ESP-01 is pulled out.
3>.Transmission distance:
In an open environment, the maximum stable transmission distance is 100M when the mobile phone is mounted on the WiFi module.
4>. When the WiFi module and mobile phone are carried on the router at the same time, the transmission distance depends on the signal strength of the router.
5>. The use of Smartcongig technology in the mobile phone on the APP ESP-01 WiFi module to complete the account and password configuration, configured username and password memory function.
6>. On-board 12V, 10A/250V AC 10A/30V DC relay, which can be continuously pulled for 100 thousand times, has diode discharge protection, short response time.
7>. On-board mode selection and real time working status indicator.
8>. Reserved UART debug interface and STM8 SWIM program download interface.
9>. Board size: 57.4*29mm.
3. Operating instructions:
Prepare the following tools before use:
12V/1A power adapter and APP “ESP Touch--Demo”
Step 1:
the 12V/1A power adapter, the positive and negative poles of the power are connected to IN+ and IN- of the module respectively.
Step 2:
Android mobile terminal installation APP''Esp Touch--Dem ", for the first use of work mode 2 to ESP-01 module configuration WiFi account number and password.
Step 3:
Android mobile terminal to install APP "Easy TCP--20", TCP transmission tool, used to send relay control instructions. Click on "SWITCH", and then enter the relay control instructions and names and contents (instruction form HEX) by the gray blocks in the interface.
Instructions for use of two operating modes and additional function:
Operating mode 1 (the mobile phone is applied directly on the WIFI module) instructions:
1>. Plug in the ESP-01 module, the module power up. About 4 seconds later, the green light changed from extinction to 2 seconds flashing. Description configuration completed.
2>. AP hot spot signal sent by mobile phone connected to ESP--01 module.
3>. Opens "EasyTCP--20" APP, and clicks "CONNECT"". After the connection is successful, the green light flashes slowly from 2 seconds to normal. Click on the gray box to send instructions to control the switch of the relay.
Operating mode 2(the mobile phone and the WIFI module are applied to the router at the same time.) instructions:
1>. Plug in the ESP--01 module, the module power, the light green light into slow flash, then press the S1 button to switch to the mode 2. Blue light, about 1 minutes later into 0.5S flash, indicating waiting for "Esp Touch--Demo" "APP" for its configuration WiFi account and password.
2>. At this time, the phone line connected to the router. Open "Esp Touch- Demo" "APP", enter the router password, click "Confirm".
3>. Waits for configuration to succeed, when the APP interface appears ESP-01 IP (such as 192.168.0.189) address, indicating that the ESP--01 module successfully connected to the router, and automatically remember the account number and password. The next entry mode 2 will automatically connect (about 20-60S to connect).
It's important to note that the 192.168.0.189 IP address is dynamically assigned to the ESP-01 module by the router. The address may change after the next re-connection. You can see the real time IP address of the ESP-01 module in the router's device list.
4>. Opens "Easy TCP--20" APP, and clicks "CONNECT". When the connection is successful, the green light flashes from 2 seconds to normal. Click on the gray box to send instructions to control the switch of the relay.
Additional functions (as USB relay) instructions:
Prepare a USB to TTL serial module. The GND, TX, and RX of the TTL module are connected to the GND, TX, and RX of the relay module respectively. Pull out the ESP-01 module, select mode 1, and turn the green light into 2S slow flash and open the serial debug software on the computer (such as SSCOM32), and choose the baud rate of 115200. Sending A0 0101 A2 in the form of sixteen (HEX) can open the relay; send the A0 0100 A1 in the form of sixteen (HEX) to close the relay. Take the relay as an example:
5. Warm tips:
1>. For the first time using the configuration WIFI password time would be a little bit longer (about 1 minutes). After the completion of the next boot up configuration requires only 20 seconds can be automatically connected.
2>. If you want to replace the router, power outages can restart or press the S2 button (press the S2 key will remove the previous memory WIFI account and password). Under Mode 2 to configure ESP--01 WiFi account and password.
3>. The router signal when the ESP--01 memory is weak or does not lead to connection interruption in the service area, the green light will be extinguished and try to connect automatically. The key in this process to the invalid state. When the green light for 2 seconds and slowly restore the connection that has flashing.
4>. Mode 1 and mode 2 only when the green light for 2 seconds and slowly flashing or steady button can be used for the rest of the chip, self configuration or wait for the configuration process. The key is invalid.
5>. ESP--01 and ESP--01 have no timeout mechanism, mobile phone data from more than 6 minutes will automatically disconnect TCP. Then click on the "EasyTCP--20" APP in the upper right corner of the "CONNECT" to re-establish a connection.
6. Package list:
1* 12V single path WiFi relay module
Shipping :
1)All items will be shipped to your
paypal address
.Please update your latest address when you check out,and please make sure to provide us with correct,precise and detailed shipping address.
2)Most of the items will be shipped via
Hongkong Airmail/Singapore Airmail
.To US customers,we will send the package via
E-packet
.
3)All items will be shipped in
1-2 business days
(excluding Sat,Sun & Holiday) after payment received and cleared. For the long-time holiday, we'll post the info on our store and reply you automatically via emails.
4)Tax:We will do our best to help you to clear the goods,and the tax depends on each country custom.
5)If you don't receive items over 30 business days,please make sure to contact us before leaving any neutral or negative feedbacks.We'll try our best to help you solve the problem.
6)The product in our store is free shipping. But the shipping method is different based on your order.If your order is
more than
,we will send the items to you with
tracking number
for free.If your order is less than ,the registered mail fee is on your side.
We could also deliver your item via EMS,DHL or Fedex based on your requirement.
Payment :
We Only Accept Paypal on Ebay. For specific requirements, please feel free to contact
us.
WiFi Relay DC5V self-lock
It's a Wifi wireless switch thet can connect to appliance of different types and brands.The App eWeLink enables you to control your devices easily.You can download IOS version in App Store and the Android version in Google Play.
Feature :
Size:7.1*3.1*2cm
Control Mode:By App
Transportation Mode:Wifi
System:Android/IOS
Remote Control Frequency:433MHZ
Wifi Working Frequency:2.4G 802.11 b/g/n
Load Power:<=2200W
Working Voltage:DC5V
Rated switching current:< 10A
Rated switching voltage:< 250V
Relay Life:>= 1000000 times
Insulation resistance:100M
Relay maximum pull-in time:15ms
Relay maximum release time:5ms
Operating temperature:-40℃~70℃
Working Humidity:40%~80% RH
Note:Share it using a mobile phone or 4G WIFI hotspot turn WIFI router,it also can be remote control
Download:
www.uctronics.com/download/U5222.zip
Package Including:
1*Sonoff Home WiFi Wireless Smart Switch 5V Relay Module Phone APP for IOS Android
5V-32V Self-lock WiFi Relay
It's a Wifi wireless switch thet can connect to appliance of different types and brands.
The App eWeLink enables you to control your devices easily.You can download IOS version in App Store
and the Android version in Google Play.
Feature :
Control Mode:By App
Transportation Mode:Wifi
System:Android/IOS
Working Voltage:DC 5V-32V
Rated switching current:< 10A
Rated switching voltage:< 250V
Relay Life:>= 1000000 times
Insulation resistance:100M
Relay maximum pull-in time:15ms
Relay maximum release time:5ms
Operating temperature:-40℃~70℃
Working Humidity:40%~80% RH
Note:Share it using a mobile phone or 4G WIFI hotspot turn WIFI router,it also can be remote control
220V WIFI Relay Switch
Voltage input range: AC 85V-264V
Board size: 50X30mm
Board weight: 9G
Total weight: 37G
Module has two operating modes
Supports most of all switch-controlled devices. You can control light changes through the mobile phone APP and open the mobile phone APP outside. The status of the home appliances is clear at a glance.
Features
1. On-board original relay, which can continuously pull 100,000 times, with diode dripping protection, response time period
2. Comply with ROHS specifications
Package includes:
1 x220V WIFI Relay Module
12V 4-CH ESP8266 WIFI Relay
Overview
The 12V ESP8266 four-way WIFI relay module uses the ESP-01 as a WIFI module, with a mature and stable 8-bit MCU chip. It can realize the wireless control of the 4-way relay using the mobile phone APP within the LAN in a simple configuration process.
Second, functional characteristics
1, Onboard high performance microprocessor and ESP-01 WIFI module;
2, the module has 2 working modes:
Mode 1: The mobile phone is directly mounted on the WIFI module;
Mode 2: The mobile phone and WIFI module are loaded on the router at the same time;
Additional features: It can also be used as a USB relay when the ESP-01 is unplugged.
3, transmission distance:
(1) In the open environment, the maximum stable transmission distance when the mobile phone is mounted on the WIFI module is 100m;
(2) When the WIFI module and the mobile phone are mounted on the router at the same time, the transmission distance is strong according to the signal of the router.
Weak and certain.
Use Smartconfig technology to complete the configuration of the ESP-01 WIFI module account and password on the mobile phone APP. The configured account and password have the power-off memory function.
5, On-board 12V, 10A/250V AC 10A/30V DC relay, can continuously suck 100,000 times, with diode escaping protection, short response time;
6, onboard mode selection and real-time working status indicator;
7, with 4 optocoupler isolation, strong anti-interference ability;
8, reserved UART debug interface and MCU program download interface.
Third, hardware introduction and explanation
Board size: 60*63mm
Board function description:
1, onboard resources:
IN+, IN-: 12V power input;
5V, GND, TX, RX:UART serial port pin;
SWIM, PIN8, NRST: Reserved MCU program download port.
Button S1: Mode switch, default is mode 1
Press key S2: restore factory settings
LED D1/D2/D3/D4 (red light): Relay operation indicator lighted when turned on
LED D7 (red): Mode 1 indicator
LED D5 (blue light): Mode 2 indicator
LED D6 (green light): Operating status indicator, described as follows:
(1) When it goes out, it means that it is self-configuring or losing connection with the router;
(2) When 0.5S is flashing, it means waiting for the mobile phone APP to configure the WIFI account and password for the ESP-01 module;
(3) When the 2S flashes slowly, it means that the configuration is completed, waiting for a TCP connection with the handset;
(4) When it is always on, it means that it establishes a TCP connection with the handset.
Reserved 2 jumper caps: Please plug in the bottom end when using normally (ie RX connects RX1, TX connects TX1). If you want to use USB to TTL serial port module to debug ESP-01 module, please plug it all the way to the top ( Otherwise there may be interference).
COM1: public end;
NC1: Normally closed, the relay is short-circuited with COM1 before the relay is closed, and it is vacant after being sucked up;
NO1: Normally open, the relay is vacant before being sucked in, and shorted to COM1 after sucking.
COM2: public end;
NC2: Normally closed, the relay is shorted to COM2 before the relay is closed, and it is vacant after being sucked up;
NO2: Normally open, the relay is suspended before closing, and shorted to COM2 after pull-in.
COM3: public
NC3: Normally closed, short-circuited with COM3 before the relay is closed, and it is vacant after suction;
NO3: Normally open, the relay is vacant before being sucked up, and shorted to COM3 after sucking.
COM4: public
NC4: Normally closed, shorted to COM4 before the relay is closed, and it is left open after suction.
NO4: Normally open, the relay is left unconnected before it is sucked in, and it is short-circuited with COM4 after pull-in.
Relay control instructions (hex hexadecimal):
Open the first relay: A0 01 01 A2
Turn off the first relay: A0 01 00 A1
Open the second relay: A0 02 01 A3
Close the second relay: A0 02 00 A2
Open the third relay: A0 03 01 A4
Turn off the third relay: A0 03 00 A3
Open the fourth relay: A0 04 01 A5
Turn off the fourth relay: A0 04 00 A4
way Relay WiFi DC5-32V
Description
：
It's a Wifi wireless switch thet can connect to appliance of different types and brands.The App eWeLink enables you to control your devices easily.You can download IOS version in App Store and the Android version in Google Play.
Feature :
4-Way Control with 4*10A Realy
Control Mode:By App
Transportation Mode:Wifi
System:Android/IOS
Remote Control Frequency:433MHZ
Wifi Working Frequency:2.4G 802.11 b/g/n
Load Power:<=2200W
Working Voltage:DC5V-32V
Rated switching current:< 10A
Rated switching voltage:< 250V
Relay Life:>= 1000000 times
Insulation resistance:100M
Relay maximum pull-in time:15ms
Relay maximum release time:5ms
Operating temperature:-40℃~70℃
Working Humidity:40%~80% RH
Mode
：
Self-locking
，
interlock
，
jog
Feedback
Payment
Shipment
About us
Feedback
We appreciate positive feedback . we always try our best to service our customers .
so if you
have ant question ,PLEASE DON’T HESITATE TO TELL US,
we are always here to offer help .
Payment
We prefer PayPal .For purchasing multiple items , please contact us for a combined invoice .
generally we would like to receive payment thin 48 hours if .
Shipment
We provide airmail service with good package . The items will be shipped within the nest
2 business days after we received the payment . when you buy multiple items ,your shipping
cost will be combined with discount .
SHIPPING
TIME
(weekends/holidays
excluded)
Country
Name
Shipping
Time
Country
Name
Shipping
Time
USA/Canada
10
-15d
Spanish/Portugue
10-25d
East/South
Asia
10
-15d
France/West Asia
10-25d
United
Kingdom
10 -20d
Italy
10-30d
Australia/New Zealand
10 -15d
West
Asia/Middle
East
15-25d
Most
Country
of
West/North Europe
10-20d
South
America
and
Africa
15-30d
East /Middle
Europe/Russia
10-25d
About us
NEW, GOOD QUALITY, ORIGINAL PACKAGE
LARGE STORE AND THE LOWEST PRICE
NO-QUESTION-REFUND,
FOR LARGE QUANTITY ,OFFER BETTER PRICE,
ORIGINAL
PACKING(TAPE REEL/TUBE/TRAY）
We specialize in electronic components . ICs, Capacitors, Diodes, Resistors,
LEDs,
Transistors, and so on.
Especially in Hard To Find Parts .
we only sell
NEW ,
ORIGINAL parts . please buy with confidence .We offer
NO-QUESTION-REFUND
go to my store
Am 23.03.21 hat der Verkäufer die folgenden Angaben hinzugefügt:
Am 18.06.21 hat der Verkäufer die folgenden Angaben hinzugefügt: