-40%

Smart Technologies Audio System 240 - Mikrofone, Verstärker,4 x Lautsprecher NEU

€ 0.52

Availability: 100 in stock
  • Herstellernummer: 100528
  • Rücknahme akzeptiert: ReturnsNotAccepted
  • Modifizierter Artikel: Nein
  • Marke: Smart Technologies
  • Im Lieferumfang enthalten: Mikrofon(e)
  • Angebotspaket: Ja
  • Beschreibung des Paketinhalts: Verstärker,Mikrofon,4 x Lautsprecher
  • Condition: Neu: Sonstige (siehe Artikelbeschreibung)
  • Herstellungsland und -region: Japan

    Description

    Aus Nachlass
    Smart Technologies Audio System 240 - Mikrofone, Verstärker,4 x Lautsprecher NEU
    Made in Japan Komplett
    Verstärker mit Netzteil,ohne Netzkabel
    Mikrofone mit Sender,Akku und Ladegerät
    Infrarot Sensor mit Akku und Ladegerät
    4 Stück Lautsprecher,ohne LS kabel
    BDA auf englisch
    Alles sind neu und unbenutzt
    Versand in OVP
    Siehe Fotos
    Der Versand erfolgt gut verpackt und versichert via DHL für 9,49€
    Ich verkaufe von privat, keine Rücknahme oder Garantie
    The
    SMART Audio 240 system amplifies the teacher’s voice so that students who sit in the
    back of your classroom hear you as clearly
    as those who sit in the front. The audio system
    makes speaking to the class more
    comfortable because you don’t need to strain your voice to
    get your students’ attention.
    Your SMART Audio 240 system includes the following items:

    one receiver

    one power supply

    one teacher microphone with
    lanyard (lanyard not shown)

    one handheld student microphone

    two microphone chargers

    four rechargeable batteries (not shown)

    one ceiling infrared sensor

    four wall or ceiling speakers
    Receiver
    Your SMART Audio receiver has two
    microphone channels so that you can use the
    teacher microphone and the handheld student
    microphone at the same time. It has two audio
    line inputs that allow you to connect an external
    audio device like a CD player, DVD player,
    computer, TV or VCR. You can record audio on
    your computer or other devices.
    Each microphone channel and external audio device line has a
    volume control so that you can blend softer and louder speaking
    voices with audio from external
    devices. You can change the
    audio tonal quality by adjusting the tone dial on the receiver.
    There’s an infrared sensor on the front of the receiver that detects
    the microphones’ infrared signal. You can use either the infrared
    sensor on the receiver or up
    to three external ceiling sensors.
    Microphones
    Your SMART Audio system inclu
    des a teacher microphone and
    a handheld student microphone. You can attach the included
    lanyard to the teacher microphone and wear it around your
    neck. You can use the handheld student microphone when
    team teaching, or you can pass it to students and allow them to
    participate in lesson activities.
    These microphones have power and channel selector switches.
    The battery indicator light glows green when the batteries are
    fresh and glows red when the batteries need to be recharged or
    replaced.
    There are transmitters on the microphones that transmit an infrared signal. To ensure optimal
    performance, don’t cover or block the infrared
    transmitters. There must be a clear line of sight
    between the microphones and the infrared sensor in order for the audio system to work
    properly.
    Microphone Chargers
    If you use the included rechargeable batteries, you can
    recharge the microphones by connecting a microphone charger
    when the battery indicator light changes from green to red.
    Fully charged batteries last approximately eight hours in the
    teacher microphone. For the handheld student microphone,
    fully charged batteries last ap
    proximately six hours when you
    set it to
    High
    and approximately nine and a half hours when you
    set it to
    Low
    . It takes approximately eight hours to fully recharge
    the batteries.
    Infrared Sensors
    Infrared sensors detect microphone signals and send them to
    the receiver. You can use either the infrared sensor on the
    front of the receiver
    or the infrared sensor for the ceiling.
    Ensure that there is a clear line of sight between the infrared
    sensor and the infrared transmitter on the microphones.
    Speakers
    Your SMART Audio system co
    mes with four wall or ceiling
    speakers. The speake
    rs mute if the signal from the
    microphones is blocked or weak. This prevents unwanted
    static and noise from occurring.
    https://support.smarttech.com/docs/hardware/audio/audio-240/de/home.cshtm